Slope

From Fiswiki

Revision as of 19:37, 14 August 2011 by Joe (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search
Slope is used to describe the steepness, incline, gradient, or grade of a straight line. A higher slope value indicates a steeper incline. The slope is defined as the ratio of the "rise" divided by the "run" between two points on a line, or in other words, the ratio of the altitude change to the horizontal distance between any two points on the line. It is also always the same thing as how many rises in one run.
Slope is used to describe the steepness, incline, gradient, or grade of a straight line. A higher slope value indicates a steeper incline. The slope is defined as the ratio of the "rise" divided by the "run" between two points on a line, or in other words, the ratio of the altitude change to the horizontal distance between any two points on the line. It is also always the same thing as how many rises in one run.

Slope is used to describe the steepness, incline, gradient, or grade of a straight line. A higher slope value indicates a steeper incline. The slope is defined as the ratio of the "rise" divided by the "run" between two points on a line, or in other words, the ratio of the altitude change to the horizontal distance between any two points on the line. It is also always the same thing as how many rises in one run.


[edit] Slope Steepness

There are two ways of measuring slope steepness. The first is a measurement using degrees, which measures the angle of the slope in degrees from the horizontal. The second is a percentage.
There are two ways of measuring slope steepness. The first is a measurement using degrees, which measures the angle of the slope in degrees from the horizontal. The second is a percentage.

There are two ways of measuring slope steepness. The first is a measurement using degrees, which measures the angle of the slope in degrees from the horizontal. The second is a percentage.

This is calculated using the formula 100*rise/run. Rise is the vertical change and run is the horizontal distance. A 100% slope is angled at 45 degrees.

  • 10% is equivalent to 5.71º
  • 20% is equivalent to 11.31º
  • 30% is equivalent to 16.7º
  • 40% is equivalent to 21.8º
  • 50% is equivalent to 25.67º
  • 75% is equivalent to 36.8º
  • 100% is equivalent to 45º

A beginner slope is typically between 6% and 25%. Intermediate hills range from 25% to 40%, and expert is 40% plus.

[edit] Also See

[edit] Reference:

  • See Wikipedia Slope [1]


Return to Freestyle Equipment Rules, General Definitions or Freestyle Skiing

Personal tools