4501.2.4

From FIS Freestyle wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 14:36, 20 October 2009 (edit)
Joe (Talk | contribs)
(New page: '''4501.2.4.1''' The gates must be set so that the competitors can distinguish them clearly and quickly even at high speeds. The gate should be set at '''right angles''' to the compet...)
← Previous diff
Current revision (14:37, 20 October 2009) (edit) (undo)
Joe (Talk | contribs)

 
Line 1: Line 1:
- 
'''4501.2.4.1''' The gates must be set so that the competitors can distinguish them clearly and quickly even at high speeds. The gate should be set at '''[[right angles]]''' to the competition line. In certain circumstances, competitors may be required to pass between two gates of the same color (for example: corridors). '''4501.2.4.1''' The gates must be set so that the competitors can distinguish them clearly and quickly even at high speeds. The gate should be set at '''[[right angles]]''' to the competition line. In certain circumstances, competitors may be required to pass between two gates of the same color (for example: corridors).
'''[[4501.2.4.2]]''' The gates must be set on both sides of all '''[[features]]''' such as [[rollers]] and [[take off]] of '''[[jumps]]''' as well as the '''[[finish line]]'''. Placing gates in blind locations such as '''[[landings]]''' shall be avoided. In flat non-banked turns, '''[[banked turns]]''' or any other '''[[type of turns]]''' a single '''[[turning gate]]''' shall be set and no '''[[outside gate]]''' will be required. (''FS0509-10'') '''[[4501.2.4.2]]''' The gates must be set on both sides of all '''[[features]]''' such as [[rollers]] and [[take off]] of '''[[jumps]]''' as well as the '''[[finish line]]'''. Placing gates in blind locations such as '''[[landings]]''' shall be avoided. In flat non-banked turns, '''[[banked turns]]''' or any other '''[[type of turns]]''' a single '''[[turning gate]]''' shall be set and no '''[[outside gate]]''' will be required. (''FS0509-10'')
 +
 +
 +----
 +Return to '''[[4501]]''', '''[[Ski Cross]]''' or '''[[International Competition Rules]]''' or see '''[[Review of 2009-2010 Freestyle Skiing Precisions]]'''
 +
 +[[Category:Freestyle Skiing]][[Category:Ski Cross]]
 +[[Category:Freestyle Course Preparation]]
 +[[Category:Freestyle Infrastructure]]

Current revision

4501.2.4.1 The gates must be set so that the competitors can distinguish them clearly and quickly even at high speeds. The gate should be set at right angles to the competition line. In certain circumstances, competitors may be required to pass between two gates of the same color (for example: corridors).

4501.2.4.2 The gates must be set on both sides of all features such as rollers and take off of jumps as well as the finish line. Placing gates in blind locations such as landings shall be avoided. In flat non-banked turns, banked turns or any other type of turns a single turning gate shall be set and no outside gate will be required. (FS0509-10)



Return to 4501, Ski Cross or International Competition Rules or see Review of 2009-2010 Freestyle Skiing Precisions

Personal tools